Question: What materials can be used with the Vapir Pen?
The Vapir Pen was designed to be used with wax and concentrates.
Question: What is included in the box?
Answer: Vapir Pen comes with a Micro USB charging battery, 1x Quartz dual-coil atomizer, 1x ceramic donut atomizer, 1x mouthpiece, 1x stainless steel tool, 3x O-Rings and a USB cord.
Question: What is the difference between the 2 atomizers available in the box?
a. Quartz dual-rod atomizes arebest with higher viscosity (thicker/solid) wax concentrates, typically used by those seeking more power at higher temperatures.It has a faster heating time which therefore gives you vapor immediately.
b. Ceramic donut atomizers feature a flat ceramic dish, have no exposed coils, and are ideal for low temperature dabbing. Since wax doesn't come into direct contact with the heating coil - it burns much slower and tastes better - which makes them ideal for conserving your concentrates.
Question: What is the material of the coil in quartz dual coil atomizers?
Answer: It is made of Titanium with a high resistance which allows coil to maintain a lower temperature while heating, resulting in less of a "burnt" taste and improved flavor.
Question: Are the rods in dual coil atomizer made of glass?
Answer: They are made of Quartz crystal. Since this material is not porous, wax never has a chance to get absorbed. This not only helps improve the taste, but also helps conserve your concentrates.
Question: How are Vapir Pen parts connected to each other?
Answer: All parts are utilized by universal 510 threading, which allows them to be connected and disconnected from each other by simply twisting them on or off, as well as being completely secured.
Question: How do I load my Vapir Pen?
Answer: Unscrewing Vapir Pen's mouthpiece reveals the chamber, in which the concentrate is placed, as well as the heating coil or ceramic disk (donut). A dab tool is used to place wax on and around the heating element, being careful not to scrape or damage the coil during the loading process.
Question: How much wax/concentrate should I put in the chamber?
Answer: For best performance, you'll want to load a pea-sized amount at a time or approximately 0.1- 0.2g, depending on the consistency of your extract. Do not overfill the chamber.
Question: How do I use the unit?
Answer: Once loaded, replace the mouthpiece back onto the unit and turn it on by clicking the power button five times consecutively (this 5-click locking mechanism prevents accidental pocket firing). At this point, the pen is ready to be used. Inhale while pressing the power button (as this activates the heating coil). The size of the draw is easy to govern, as it's controlled by the length of time the power button is held as the pen is hit.
Question: How do I change the temperature setting?
Answer: Temperature settings can be toggled by pressing the power button four timesconsecutively. Each setting varies depending on the color displayed. Vapir Pen can typically be set on 350°F (green), 390°F (blue) or 430°F (red).
Question: How do I clean my atomizers?
Answer: Soak the atomizer in rubbing alcohol for 10 minutes then blow out the chamber from top and bottom with air gun. Make sure it is completely dry before reusing. You may use a Q-tip carefully to clean all residues off the walls. DO NOT force the Q-tip on the coil or it mightbreak. DO NOT soak overnight.
Question: How do I charge the Vapir Pen?
Answer: Simply connect the included USB cable to the Micro-USB port at the bottom of the battery on one side, and to any USB power supply on the other side. When the battery is fully charged, the LED turns to green.
Question: How long does a fully charged battery last?
Answer: The length of the battery depends on the length of your sessions and if they are consecutive or not. It can also vary depending on the power temperature setting you are using but typically you should be able to get about 100 draws from the device. In some cases it can vary anywhere from 100 draws to about 200 draws that have been initiated from previous customers.
Question: How often should we clean our device?
Answer: If you start to feel the drag on your device is clogged or not as smooth as it should be and your chamber has excess residue, for a smoother and cleaner vapor we suggest cleaning it ever so often.
Question: What are the extra O-rings used for?
Answer: The O-rings go in between the two-piece mouthpiece to ensure a tight fit. We have put extra rings in the box in case the one that is currently installed loosens.